| Staff Directory | Staff Profile
Prof. Madya Dr. Lukman Bin Ismail Profile Page
Name :  Prof. Madya Dr. Lukman Bin Ismail
Designation :  Profesor Madya
Phone Number/ Ext :  09-9477000
Email :  lukman.i@umk.edu.my
Department : Fakulti Industri Asas Tani
Qualifications : Ijazah Doktor Falsafah (DOCTOR OF PHILOSOPHY IN CHEMICAL AND PROCESS ENGINEERING) (Heriot-Watt University)
Ijazah Sarjana (IJAZAH SARJANA SAINS (TEKNOLOGI PROSES KIMIA)) (Universiti Sains Malaysia)
Ijazah Sarjana Muda (IJAZAH SARJANA MUDA TEKNOLOGI) (Universiti Sains Malaysia)
Nov 2011 - Nov 2012 : Investigation of Wax Deposition in a Flow Loop System
 
Nov 2011 - Nov 2012 : Biodiesel production by Transesterification of Waste Cooking Oil with an in-situ Water Adsorption
 
Nov 2014 - Nov 2015 : Development and Characterization of Novel Materials Using Ionic Liquids for the Treatment of Effluent Containing Dyes
 
Jurnal (Berwasit)
  5. A Asif, Z Man, M Azizli, K Azizi, MF Nuruddin, L Ismail. (2015). Materials Science Forum, The Effect of Si/Al Ratio and Sodium Silicate on the Mechanical Properties of Fly Ash Based Geopolymer for Coating
 
  Khalik M. Sabil, Omar Nashed, Bhajan Lal, Lukman Ismail, Azuraien Japper-Jaafar(2015). The Journal of Chemical Thermodynamics, Experimental Investigation on the Dissociation Conditions of Methane Hydrate in the Presence of Imidazolium-based Ionic Liquids
 
  T Rahmiati, KA Azizli, Z Man, L Ismail, MF Nuruddin(2015). Materials Science Forum, Effect of Solid/Liquid Ratio during Curing Time Fly Ash Based Geopolymer on Mechanical Property
 
  R. H. Abdul Rahim, T Rahmiati, KA Azizli, Z Man, MF Nuruddin, L Ismail (2015). Materials Science Forum, Comparison of Using NaOH and KOH Activated Fly Ash-Based Geopolymer on the Mechanical Properties
 
  Thanh H. Trinh, Kuzilati Kushaari, Anis S. Shuib, Lukman Ismail, Babar Azeem(2015). Biosystems Engineering, Modelling the Release of Nitrogen from Controlled Release Fertiliser: Constant and Decay Release
 
  M Kermanioryani, L. Ismail, MIA Mutalib, G Bagherzadeh (2014). Applied Mechanics and Materials , Removal of Methylene Blue from Aqueous Solution by Ionic Liquid
 
  T Rahmiati, KAM Azizli, Z Man, L Ismail, MF Nuruddin (2014). Applied Mechanics and Materials , The Effect of KOH Concentration on Setting Time and Compressive Strength of Fly Ash-Based Geopolymer
 
  18. AH Pauzi, L Ismail, AA Siyal, Z Man, KA Azizli (2014). Applied Mechanics and Materials, Experimental Study of Geopolymer Solidification Kinetics
 
  RM Hamidi, Z Man, KA Azizli, L Ismail, MF Nuruddin(2014). Applied Mechanics and Materials , Mechanical Activation of Fly Ash by High Energy Planetary Ball Mill and the Effects on Physical and Morphology Properties
 
  AA Siyal, L Ismail, Z Man, KA Azizli(2014). Applied Mechanics and Materials , Effect of NaOH and Water Contents on Solidification of Sodium Silicate Free Geopolymer
 
  M Sagir, IM Tan, M Mushtaq, L Ismail, M Nadeem, MR Azam (2014). Journal of Dispersion Science and Technology, Synthesis of a New CO2 Philic Surfactant for Enhanced Oil Recovery Applications
 
  N. Prabaningrum, L. Ismail and D. Subbarao (2014). Advanced Materials Research , In-Situ Methanolysis of Jatropha curcas seeds in Soxhlet Extractor
 
  Syamsul B. Abdullah, Z. Man, L. Ismail, M.I. Abdul Mutalib and M.A. Bustam(2014). Advanced Materials Research, Solubility Parameters based on Refractive Index Data of Ionic Liquid
 
  Thanh H. Trinh, KuZilati KuShaari, Anis Suhaila Shuib, Lukman Ismail, Abdul Basit, Babar Azeem.(2014). Advanced Materials Research , Modeling the Release of Urea from Coated Urea: The Constant Release Stage
 
  A Hosseinipour, KM Sabil, A Arya Ekaputra, AB Japper, L. Ismail(2014). Applied Mechanics and Materials, The Impact of the Composition of the Crude Oils on the Wax Crystallization
 
  TH Trinh, QN Dao, KZ Ku Shaari, L Ismail, A Shuib (2014). Applied Mechanics and Materials , Study the Release of Urea from Agrium? Coated Urea Using UV-Vis Spectrometer
 
  A Rahim, R Hanim, KA Azizli, Z Man, T Rahmiati, L Ismail(2014). Applied Mechanics and Materials , Effect of Solid to Liquid Ratio on the Mechanical and Physical Properties of Fly Ash Geopolymer without Sodium Silicate
 
  A Asif, Z Man, KAM Azizli, MF Nuruddin, L Ismail(2014). Applied Mechanics and Materials, Effect of NaOH Concentration on the Strength of Non Sodium Silicate Fly Ash Geopolymer.
 
  16. S Tsabitah, AA Omar, L. Ismail(2014). Applied Mechanics and Materials , Chemical Pretreatment Comparison for Oil Palm Empty Fruit Bunch: A Review
 
  N Prabaningrum, L. Ismail, D Subbarao(2014). Applied Mechanics and Materials , Reaction Kinetics of In Situ Methanolysis of Jatropha curcas Seeds
 
  Syamsul B. Abdullah, Z. Man, L. Ismail, A. Maulud and M. A. Bustam(2013). International Journal of General Engineering and Technology (IJGET), Ionic Liquids Classification for Fuel Desulphurization
 
  30. Azam, Muhammad Rizwan; Tan, Isa M; Ismail, Lukman; Mushtaq, Muhammad; Nadeem, Muhammad; Sagir, Muhammad(2013). Journal of Dispersion Science and Technology , Kinetics and Equilibria of Synthesized Anionic Surfactant onto Berea Sandstone
 
  Azam, M. R., Tan, I. M., Ismail, L., Mushtaq, M., Nadeem, M., and Sagir, M. (2013). Journal of Petroleum Exploration and Production Technology, Static Adsorption of Anionic Surfactant onto Crushed Berea Sandstone.
 
  Sagir, Muhammad; Tan, Isa M; Mushtaq, Muhammad; Ismail, Lukman; Nadeem, Muhammad; Azam, Muhammad Rizwan; Hashmet, Muhammad Rehan(2013). Journal of Dispersion Science and Technology, A Novel Surfactant for the Reduction of CO2/Brine Interfacial Tension.
 
  Mushtaq, Muhammad; Tan, Isa M; Ismail, Lukman; Lee, Susan Y C; Nadeem, M; Sagir, M(2013). Journal of Dispersion Science and Technology, Oleate Ester-Derived Nonionic Surfactants: Synthesis and Cloud Point Behaviour Studies
 
  Mushtaq, Muhammad; Tan, Isa M; Ismail, Lukman; Nadeem, Muhammad; Sagir, Muhammad; Azam, Rizwan; Hashmet, Rehan(2013). Journal of Dispersion Science and Technology, Influence of PZC (Point of Zero Charge) on the Static Adsorption of Anionic Surfactants on a Malaysian Sandstone.
 
  RNM Kamil, S Yusup and L. Ismail(2013). Asian Journal of Chemistry, Application of Taguchi Method for Optimization of Polyol Ester Production by Esterification of Neopentyl Glycol with Hexanoic Acid
 
  Aziz, M. A., Sabil, K. M., Uemura, Y., & Ismail, L.(2012). Journal of Applied Sciences, A study on torrefaction of oil palm biomass.
 
  Abdullah Syamsul B., Z. Man, Ismail L., Maulud A., Abdul Mutalib M.I. and Bustam M. A.(2011). Res.J.Chem.Environ, An Optimization Study on the Extraction of Benzothiophene from Model Fuel using the Ionic Liquids 1-Butyl-3-Methylimidazolium Octylsulfate
 
  Ismail, L., Westacott, R.E. and Ni, X(2008). Chem. Eng. J. , On the Effect of Wax Content on Paraffin Wax Deposition in a Batch Oscillatory Baffled Tube Apparatus
 
  Ismail, L., Westacott, R.E. and Ni, X. (2007). J. Chem. Technol. & Biotechnol, On the Characterisation of Wax Deposition in an Oscillatory Baffled Device
 
  6. N. H. Zamri, L. Ismail, A Rahim, R Hanim, AA Siyal, Z Man, KA Azizli (2007). Materials Science Forum , Kinetics of Geopolymer Solidification Study Using Texture Analyzer
 
  O Nashed, KM Sabil, B Lal, L Ismail, AJ Jaafar (2007). Applied Mechanics and Materials , Study of 1-(2-Hydroxyethyle) 3-methylimidazolium Halide as Thermodynamic Inhibitors
 
  Nguyen Tien Thanh, Yoshimitsu Uemura, Noridah Osman, and Lukman Ismail(2007). Journal of the Japan Institute of Energy, The Effect of Aeration Rate on the Growth of Scenedesmus quadricauda in Column Photobioreactor
 
  Rizwan Safdar, Abdul Aziz Omar, Lukman B. Ismail, Arhama Bari, Bhajan Lal.(2007). Chinese Journal of Chemical Engineering, Measurement and Correlation of Physical Properties of Aqueous Solutions of Tetrabutylammonium Hydroxide, Piperazine and Their Aqueous Blends
 
  Nunung Prabaningrum, Lukman Ismail, Duvvuri Subbarao(2007). Applied Mechanics and Materials, Optimization of In-situ Methanolysis of Jatropha curcas Seeds.
 
 
Prosiding Antarabangsa
  Omar Nashed, Khalik M. Sabil, Bhajan Lal, Lukman Ismail and Azuraien Japper @Jaafar(2014). 3rd International Conference on Process Engineering and Advanced Materials 2014 (ICPEAM2014). 3-5 June 2014, Kuala Lumpur Convention Center., Study of 1-(2-Hydroxyethyle) 3-methylimidazolium Halide as Thermodynamic Inhibitors
 
 
1. Engineering Sciences  |  Chemical Engineering  |  Other Chemical Engineering